C250T/840_001
ROUND
(test load 25 ton) For gully tops installed in the area of kerbside channels of roads which when measured from the kerb edge, extend a maximum of 0.5m into the carriageway and a maximum of 0.2m into the footway.
Cover
D
900 mm
h
70 mm
Frame
C/O
790 mm
F
1065 mm
H
113 mm
Weight
Frame
24.8 kg
Cover
61.2 kg
Total
86 kg
Norm
EN 124-5:2015
Manufacturing process
SMC compression molding with prepregs
Surface design
14x14 square with T01 treatment
Colour
black RAL 9011
Lifting
2 eye screws 2 washers 2 hexagonal nuts
sealing
yes (EPDM)
Specification item
Manhole cover in composite material class C250, round shape, with sealing, clear span diameter 800 mm Supply of M.M. srl manhole cover for inspection chambers class C250 type C250T/840_001, produced in COMPOSITE material (thermosetting resins, glass fibers and other additives) by means of a compression and (SMC) controlled temperature molding process, C2 class and in compliance with EN 124-5:2015 norm by ISO 9001:2015 certified company. Black color in mass, other colors as an option on request. Marking with class of resistance, norm reference, identification of the producer and quality mark issued by international accredited certification body. Name of buyer or optional service upon request. Composed of: - ROUND shape frame in COMPOSITE material complete of specific wings for the perfect anchoring during installation, equipped with EPDM SEALING. - ROUND shape cover in COMPOSITE material with non-slip surface. Customized motives upon request. Locking system by means of S.S. screws, concealed lifting system made of S.S. eyelets and specific key included. C/O: Ø800 mm, F: Ø1065 mm
Description and properties
Manhole covers and gully tops for use in vehicular and pedestrian areas. Design requirement, type testing, marking, quality control according to the UNI EN 124-5:2015 standard Certificate P187 issued by ICMQ. Reference norm (EN 124-5), producer identification and quality mark released by an internationally acknowledged certification authority; marked with resistance class.
Manufacturing process and material
For the EN 124-5:2015 norm requirement, the production of the manhole covers turns out to be of C2 class (”Composite material C2” Point 4.2 Type of composite materials). It’s a compression molding process made in a close mold with controlled temperature (SMC) by using thermosetting resin (polyester resin), glass fibers and other additives.
